Clean glassware is essential in any lab. Labconco SteamScrubber™ Glassware Washer provides thorough, efficient, and economical cleaning that meets demanding laboratory standards. Washer SteamScrubber Labconco freestanding

Lower basket U 175/1 for the optimum loading of narrow necked glassware U 175 lower basket/injector

Injector nozzles with plastic supports ID 180 Injektordüse mit Kunststoffspitze, 4,0 mmDurchm., 180 mm lang

Insert A 11/1 for the gentle cleaning of delicate items by interrupting the spray jet A11/1 Unterlegrahmen, 429 x 429mm

Provide thorough, efficient, and economical cleaning that meets demanding laboratory standards by outfitting your lab with a Labconco FlaskScrubber™ Glassware Washer. Free Standing FlaskScrubber, 230V/50Hzfreestanding with high heat

Holder E 476 for micro instruments with a Ø of 4-8 mm E 476 Pidike

Fitting kit MVA for installation of the machine without a plinth tray (G7825/G7826) MVA Montagesatz Verankerung für G 7825/26

Upper basket O 187 for the optimum loading of narrow necked glassware Oberkorb/Injektor O 187, mit 34 Düsen/Arretierungen, Bestückungshöhe: 170 mm

Insert E 105/1 for the optimum loading of test tubes up to 12 x 165mm E105/1 Einsatz-1/4, für Reagenzgläser 12 x 165mm,6 Fächer, einschl. Deckel A 13

Module E 945/2 for inserts E 945/2 Modul 1/2 Aufnahmerahmen für Einsätze

Retrofit kit SST serial interface Nachrüstsatz SST

Bellows dispenser pump DOS NA 120 for dispensing liquid neutral/alkaline media (PG 8536) Nachrüstsatz Dosierpumpe DOS 4 für PG 8536

Mobile unit E 935/2 for the optimum cleaning of instruments on 3 levels E 935/1 Wagen TA/leer mit 3 Ebenen

Injector carriage for 116 pipets E 406

Insert E 494 for the gentle holding of 5 microtiter plates E 494 Teline

Mobile unit E 941 for modules on 2 levels E 941 Wagen TA (leer) Zur Aufnahme von Modulen in

Appliance lid DE-CS7-78 for the top cover on the machine, 70 cm deep, 90 cm wide DE-CS7-78 Deckel, schräg, Edelstahl, Abm. 900 x700 x 30mm

Upper basket O 800/1 for the optimum loading of different inserts O800/1 Lafette/leer, Bestückh. 200mm

Insert E 106 for the optimum loading of wide neck flasks, etc 1/2 SUPPLEMENT FOR BOTTLE WITHVARIOUS 26 HOOKS ON 2 LEVELS

Conductivity measurement 27/28 LFM for PG 8527/28 LWM 27/28 Leitfähigkeits- messung LFM

Dosing cabinet PG 8596 (AE) for the storage of process chemicals and dosing modules PG 8596 AE Dosierschrank

Dosing cabinet PG 8596 (AW) for the storage of process chemicals and dosing modules PG 8596 AW Dosierschrank

Appliance lid DE-CS6-78 for the top cover of machine incl. side unit, 60 cm deep, 90 cm wide DE-CS6-78 Deckel, schräg, Edelstahl, Abm. 900 x600 x 30mm

Conversion kit UBS 3 for use with selected series G 78 upper baskets in PG 85 machines UBS 3, Conversion kit for old baskets to new PG85xx range

Insert E 402 for optimum loading of up to 44 watch glasses E402, Half insert for 44 watch glasses 80mm to 125mm dia

Appliance lid DE-CS7-85 for the top cover on the machine, 70 cm deep, 90 cm wide (PG 8583 CD) EN-CS7-85 Stainless steel cover for PG 858X CD, H

Clamps E 354, height-adjustable for optimum positioning of laboratory glassware on the nozzle E 354 Arretierung für Düse 6.0 x 220mm

Conversion kit connection module AM 10 for PG8535 / PG 8536 Change Series RO-water port on the PG8636

Spare spray arm 2 with magnet for mobile units on G 7827/28 Ersatzspülarm 2 mit Magnet für Wagen der G 7827/28

Steam condenser DK 25/26 for G 7825/ G 7826 DK for G 7825/26