Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L.

Versatility at a lower cost than stainless-steel tanks.

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking.

Enhance mixing capabilities open-bag, flat-bottom Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners , which offer cost-effective, single-use fluid processing.

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover.

Cylindrical glass tanks for the development of 1 x 3 in. to 10 x 20cm plates.

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks.

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs.

Molded glass tanks for development of any size TLC plate up to 20 × 20cm

Nalgene Heavy-Duty Cylindrical LLDPE Tanks include a needle-type spigot installed for draw off. Spigot accepts 5/8 inch I.D. tubing. Tanks are offered in sizes from 19 to 208L.

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks.

Enable overhead mixing in a closed system with this unique flange assembly that can be used with all sizes of Thermo Scientific™ Nalgene™ Closed-Dome Tanks.

Dispense most liquids, including reagents, distilled water and titrants, using these polypropylene copolymer (PPCO) lowboys, which fit into tight spaces and can stack three high.

For use with Kontes™ rectangular developing tank (K416190-4900)

Cylindrical glass tanks for the development of 5 × 10cm (2 × 3.9 in. ) and 5 × 20cm (2 × 7.9 in. ) plates

Designed to rationalize laboratory and small production line organization. Kartell™ Tank with Spigot gives the opportunity to optimize water, aqueous solutions and solvents availability in a reduced space.

Kartell™ HDPE Industrial Tank is useful in everyday laboratory practice and features a comfortable handle with a secure seal-cap following DIN recommendations.

Constructed of high density polyethylene, making it good for packaging and transporting liquids in the food industry. Kartell™ Spigot for Tank facilitates easy use by allowing the tank to be in a position to stand.

The containers close completely tight. They have thick sides, they are seamless, impact resistant and stressfree sintered. The wide-necked opening enables safe filling.

Fungicrom Separating Chambers (TLC) are to be used with thin layer chropatography.

Mason jar shaped developing chambers for TLC application. Use of small TLC plates and sheets. Dimensions: height 109 mm, diameter 63 mm, thread type GL 55, glass of hydrolytic category III, lid is made of PP with LDPE sealing disk.