Versatile, easy-to-use pH, mV, and temperature meter. Jenway™ Glass Bench pH Meter is ideal for routine analysis. PH-METER JENWAY 3510 COMPLETE

Visible (glass) 100mm path length cuvette

Parts and accessories that keep your flame photometer operating X1 Inlet tube, 500mm

Use these electrodes for advanced applications where faster response times and greater reproducibility are required. pH Electrode General Purpose Epoxy bodied

Offers accuracy with 1, 2 or 3 point conductivity calibration across the wide measurement range of 0 to 19.99S. Jenway™ 4520 Conductivity Meter without Probe ensures optimum accuracy with a dedicated “pure water” mode. Model 4520 conductivity/temperature meter with graphics display , without probe, UK power supply

500ML 1413µS conductivity standard

Ideal for use in all laboratories where pH and conductivity analyses are required. The setup menu gives quick and easy access to the whole range of instrument, pH and conductivity measurement options. Conductivity/pH meter 3540 probe w/ATC K=1, electrode stand & holder ATC probe BNC plug pH4,7&10

Optimize the performance of your Jenway meter 100ML pH Electrode fill solution 3M KCl

Suitable for applications that require measurements in the UV-visible range. Jenway™ 6305 UV/Visible Spectrophotometer includes multi-parameter displays, full interfacing capability, and versatile sampling accessories. SPECTROPHOTOMETER 6305

550 portable pH meter supplied in carry case with epoxy combination pH electrode, ATC probe and batteries. A small, lightweight general purpose pH meter offering 2 point pH calibration and automatic buffer recognition. Simultaneously displays both the temperature compensated pH readings and temperature. 550 Portable PH Meter

Provides a wavelength range of 320 to 1000nm and includes absorbance, %T and concentration modes. Jenway™ Visibile Spectrophotometer is a high quality, low cost unit supplied with mains lead, pack 100 disposable cuvettes, 10 x 10mm cell holder, interface cable and PC application software on CD-ROM. SPECTROPHOTOMETER 6300 + SOFT

Redox electrode (platinum ORP) (max. temp. 80°C) Redox electrode (platinum ORP) (max. temp. 80°C)

Jenway™ pH Temperature Electrodes are used in conjunction with Jenway™ pH meters – 3510, 3520, 3540, 3340, 3345, and 4330. Food electrode (max. temp. 60°C)

Food pH electrode with S7 connector for use with Model 430 Food pH electrode with S7 connector (430)

Requires a much more narrow range of wavelengths. Jenway™ Fluorimeter Interference Filter allows a specified wavelength and light to pass through to the sample. Interference Filter Wavelength 650nm

RECTANGULAR SUPPORT

Conductivity cell K=10

Pre-programmed with all the most common methods for protein analysis including Bradford, Lowry, Biuret, BCA and Direct UV methods. Jenway™ Genova Plus Life Science Spectrophotmeter can also be used as a standard spectrophotometer with measurement modes for photometrics, concentration, multi-wavelength, spectrum scanning, quantitation, and kinetics. Spectrophotometer Genova Plus JENWAY

500ML Conductivity calibration standard 12.88mS (500ml)

PFP7 NEBULISER INLET TUBING 500mm

Use this spectrophotometer QC and testing procedures for a wide variety of services and industries. Jenway™ 6320D Visible Spectrophotometers are high quality, low cost units for spectrophotometric applications in schools and colleges. SPECTROPHOTOMETER 6300

THERMOSTATING SUPPORT

Bibby Scientific™ Jenway™ pH Meter Adapter Lead features a waterproof connector to the BNC electrode connector. Adapter lead (Waterproof connector to BNC)

400NM FILTER FOR FLUORIMETER

Cuvette micro quartz UV/visible applications 500µL

Calibration standard 120mmol/l Sodium, 2mmol/l Pot

'O' RING GREASE

High temperature glass bodied combination

For use with TracyCell Fibre Optic Cuvette Replacement 0.2mm path length cap for 035 262

Better performance on your spectrophotometers Interference Filter Wavelength 440nm