1L SOL 0,1M SODIUM HYDROXIDE

100ML PH EUR PHENOLPHTHALEIN SOLUTION R1

METOXYPHENYLACETIQUE EUR PH 100ML

5LT Purified Water 5L

125ML SOL PYROANTIMONATE POTASSIUM

Tested, certified, NIST traceable, and shelf-stable buffer solution. 500ML BUFFERTLÖSNING PH 3,788

STANDARD COLOR 100 HAZEN

500ML BUFFER SOLUTION PH4.10 0 .04

1 BOTTLE 10G PH EUR RÉACTIF LEAD ACETATE COTTON

Accredited to ISO 17025. Reagecon™ Conductivity Standard, NIST Traceable, 147μS/cm is an aqueous-based, non-hazardous low-level conductivity standard with a high degree of accuracy, low temperature variation and guaranteed stability through expiration, even after opening the bottle. CONDUCTIIVTY STANDARD 147 MICROSIEMENS/CM 25°CVE=500 ml

Acts as a control or reference material, rather than as a calibration standard because redox oxidation/reduction (ORP) is an absolute measurement and the sensing electrode does not require calibration. 500ML REDOX STANDARD 600MV 25 ° C

Fully factorized, high purity, stable, certified product, developed and tested for complexometric titrations. 5LT EDTA DISODIUM SALT 0,1M 5LANALYTICAL VOLUMETRIC SO

500ML BUFFER PH7.000 (YELLOW) 0.010 25°C

X12 AMP 200MOSM/KG H2O OSMOLALITY STANDARD

1L BUFFER PHOSPHATE SOL PH9,0 EUR

Specified for use in individual United States Pharmacopoeia (USP) Monographs and tested and certified by an ISO17025 Accredited Test Method (INAB Ref. 264T). 100ML PHENOLPHTHALEIN TS/RS CONFORMS TO USP35

1L BROMIDE IODINE PH EUR

100ML PH EUR POTASSIUM IODOBISMUTHATE SOLUTION

Analytical Volumetric Solution EDTA 0.10N (0.05M)

100 ML POTASSIUM CHLORIDE (KCI 3.8MOL/L ELECTRODEfilling solution, free from Silver ion100mL

Used to calibrate, control, verify, or validate cryoscopes. 250ML CRYOSCOPE STANDARD 530 (-0.512°C)

500ML X500ml Buffer Solution PH 5.0 a

Used to calibrate, control or validate all types of osmometers. X12 AMP 500MOSM/KG H2O OSMOLALITY STANDARD

100 ML COBALTOUS CHLORIDE CS

Presented as an easy-to-use, color coded capsule. Reagecon™ Buffer Solution, pH 4.00, Red is tested at 25°C using an ISO 17025 accredited method and is NIST traceable. Each preservative-free capsule dissolves quickly into 100mL water to form a highly accurate calibration and control solution. X50 CAPSULES PH 4

One of a series of standards used to calibrate and control the Corning 965D Carbon Dioxide Analyzer. CO2 STANDARD 6G/L 100 AMPOULES

100ML POTASSIUM TETRADIOMERCURATE

500 ML CONDUCTIVITY STANDARD 1000µM/CM 500ML

Manufactured from ultra-pure metal (99.999%) tested by an ISO17025 Accredited Test Method (INAB Ref: 264T) and raw materials assayed by titration and ICP-MS prior to manufacture. 100ML ICP STANDARD RHODIUM 10% HCL 1,000UG/ML

15ML SUCROSE (BRIX) STD 35% - 1.390322 (± 0.00004)