Accommodates a variety of plate sizes RECTANGULAR TLC TANK 'SHORTY'

X5 tanks HDPE with spigot 10 L

For use with Thin Layer Chromatography. TLC TANK FOR 5 PLATES 20X20CM

Molded glass tank lids for development of any size TLC plate up to 20 × 20cm Developing Tank with Latch Lid two 20 x 20cm or

200L LDPE CONTAINER

Versatility at a lower cost than stainless-steel tanks. CYL. TANK W. SPIGOT HDPE 15 GAL.

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. 28L TANK

Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYL. TANK W. COVER HDPE 55 GAL.

Versatility at a lower cost than stainless-steel tanks. RECTANGULAR TANK W COV HDPE 15GAL.

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. RECTANGULAR TANK W COV. PP 6GAL.36x25x25cm, 23L

Enable overhead mixing in a closed system with this unique flange assembly that can be used with all sizes of Thermo Scientific™ Nalgene™ Closed-Dome Tanks. Closed-Dome Bio Tank closure

Enhance mixing capabilities open-bag, flat-bottom Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners , which offer cost-effective, single-use fluid processing. X10 tank liner 757L/200GAL 25kgVE=10 Stück

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. CYL. TANK W COVER PP 10 GAL

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. Lightweight Cylindrical LLDPE Tank with Cover andSpigot, 208L

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. BIOTECH CLOSED DOME TANK PPCO 30GASchraubverschluss

Cylindrical glass tanks for the development of 1 x 3 in. to 10 x 20cm plates. TLC tank Kimble cylindrical glass for 1 x 3inch

Cylindrical glass tanks for the development of 5 × 10cm (2 × 3.9 in. ) and 5 × 20cm (2 × 7.9 in. ) plates Kontes TLC Cylindrical Developing Tanks, Chromatog

Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. ASPIRATOR POLYPROPYLENE LOWBOYS CAPACITY 8 LITRES(2324-0008)

BENCH CAN YELLOW (1L)

2L BENCH CAN YELLOW

X30 industrial tanks HDPE 5 L GL51

RINSE TANK FLOOR STANDING, WITH FOOT TREADLEsteel yellow83L

19L DIP TANK YELLOW

30 L THERMOS DILUTION WATER TANKmit Temperierschlange, 30 l

4L DIP TANK YELLOW

X48 industrial tanks HDPE 2 L GL45

X2 tap for tanks 1770 and 1771

Dip tank for cleaning parts and sub assemblies

X2 stackable tanks HDPE 380x280x200mm 20L

X2 stackable tanks HDPE 560x330x255mm 46L