Stabilize vessels and labware without scratching or marking them. Fisherbrand™ Vinyl Coated Lead Ring feature a soft coating around O-shaped lead rings. Available in four sizes to accommodate a variety of flask sizes. COVERED LEAD RING WEIGHT

Protects and stabilizes expensive glassware. SP Scienceware™ Round Lead Ring Flask Weights with Vikem™ Vinyl Coating reduces floating, breakage and chemical spills. Lead ring for Erlenmeyer flasks 125-500 ml

X4 Shelf dividers for safety cabinets

“Wire” lead weights coil into a helix, spiral, cone or any irregular shape to stabilize vessels in a water bath VINYL COATED LEAD WIRE

Provides for precise height adjustment with the turn of a knob. Fisherbrand™ Laboratory Jacks are manufactured from aluminum alloy with a lifting screw in stainless steel. Labjack 100 x 110mm

Provides for precise height adjustment with the turn of a screw. R&L Enterprises™ Aluminum Labjacks are manufactured to close tolerances with a stainless steel operating screw.
Alum labjack 50x40 mm

Providing exceptionally rigid and robust support without excessive weight. Aluminium labjack argent 260x320mm

TOP PLT 12-25 SAMP MANFLD

With slight taper on the inside wall which allows a variety of different size round bottom flasks to fit into one holder X3 FLASK HOLDER SCIENCEWARE SAFELAB 50ML (PACK OF3)

Optimised for the application in cell culture X3 Filter unit Sartorius Sartolab 150v vacuum,

Stabilizes expensive glassware. Bel Art™ SP Scienceware™ Vinyl-Coated Lead Rings will not scratch flasks. FLASK STABALIZING CLOSED LEADRING 19X51MM I,D. XO.D. Fits cylinder 5-10ml

Fit neatly around flasks with sidearm tubing connections. Bel Art C-Shaped Lead Rings for Flasks are available in four diameter/weight combinations. FLASK STABALIZING OPEN LEADRING 43 MM I.D. FITSflask 125-500ml

Protects and stabilizes expensive glassware. Bel Art™ Round Lead Rings With Vikem™ Vinyl Coating are safe for use with fragile laboratory glassware. FLASK STABALIZING CLOSED LEAD RING 51 X 89MM I.D.x O.D. Fits flask 250-1000ml

The smooth, easy-to-clean top plate supports gradient makers, hot plates, flasks, beakers, baths and other lab items up to ten times its own weight POLYCARBONATE LABJACK

Prevent the “domino effect” of flasks tipping one over the other RACK 12XCULTURE FLASK 25CM²

For use with Metro Super Erecta, Super Adjustable Super Erecta and Super Erecta Pro wire shelving systems 14 1/2 Mobile Unit Post Metrose - 13UPK3

ATTACHMENT FOR 10 TEST TUBES

Compatible with MetroMax i™ and MetroMax Q™ shelves Metro Max Triangular Post - MX74P

Manufactured according to DIN 12897. Bochem™ Aluminum Epoxy Lab jack features improved scissor technology with reduced tolerances. LABOLIFT 240X240MM ALU POWDER COAT

7 5/8 Mobile Unit Post Metros - 7UPK3

ATTACHMENT FLASK100ML (MAXIMUM 9)

STAINLESS STEEL 18/10 125 CMLxD=1250x12mm

Manufactured from 18/10 stainless steel. Bochem™ 18/10 Stainless Steel Lab jack features improved scissor technology with reduced tolerances. APPARATUS JACK LABOLIFT 130X160MM

For cart-washable and autoclave applications 54 Stemcaster54 Swdgd Posts - 54UPS-SW

Made of zincked steel 1M STEEL ROD / M10 STAND 12MMx 12 mm

ATTACHMENT FLASK 250ML (MAXIMUM 5)

Connect the blue anodized aluminum Bochem™ Lab Jack to a special adjusting wheel using a ratchet (included). LAB-JACKS ALU 40X40CM 80KG

Metro 74 Postmetro 74 Post - MQ74UPE

Manufactured from 18/10 stainless steel. BOCHEM™ 18/10 Stainless Steel Support Rod come with M10 thread. SS STAND SHAFT 1000X12MM

Metro Max Post - MX54P