TLC Products

Kontes™ Replacement Parts for TLC Equilibration Apparatus

For use with Kontes™ rectangular developing tank (K416190-4900) ALUMINUM RACK FOR 14429

Macherey-Nagel™ Glass Laboratory Sprayer

Used as an accessory in thin layer chromatography applications. Macherey-Nagel™ Glass Laboratory Sprayer includes a 100mL, clear glass conical flask with a sprayer-stopper assembly and rubber bulb/tubing. Glass from laboratory sprayer with rubber bulb

Macherey-Nagel™ RP-18 W/UV254 Glass HPTLC Plates

Designed for use in HPTLC. Macherey-Nagel™ RP-18 W/UV254 Glass HPTLC Plates have a layer of modified nano silica with a fluorescent indicator for short-wave UV (254nm). It is wettable with water, acid-resistant and stable at pH 2–10. X25 TLC precoated plates RP-18 W/UV 254 size: 20x20 cm

Macherey-Nagel™ Alugram Aluminum Sheet Nano-SILGUR UV254

X25 ALUGRAM Xtra sheets Nano-SILGUR UV254 with concentrating zone size: 10 x 10 cm

Macherey-Nagel™ Standard SIL G Silica Layers on Glass Plates

Separate non-volatile mixtures with unmodified standard silica layers for TLC (Thin-Layer Chromatography). Standard SIL G silica layers on glass plates come in a variety of plate sizes and layer thicknesses. Select a fluorescent indicator and choose from a variety of pack sizes. X25 TLC precoated plates SIL G-25 UV 254 size: 20x20 cm

Witeg™ Sprayer

Ideal sprayer system for chromatography. Witeg™ Sprayer comes with an Erlenmeyer flask and an aspirator bulb. 100 ML SPRAY NS19/26

DWK Life Sciences Kimble™ Kontes™ Rectangular TLC Developing Tanks

Molded glass tanks for development of any size TLC plate up to 20 × 20cm DEVELOPING TANK WITH NONSLIP Lid 20 x 20cm orfour 5 x 20cm plates

Cole-Parmer™ Analtech TLC Tank

CHAMBER 20X20 TLC PLATES

DWK Life Sciences Kimble™ Kontes™ Reagent Sprayers Head Only

TLC Sprayer head for use with 125 mL Flask with Knots Sprayer System TLC SPRAYER HEAD FOR 125 ML FLASK

DWK Life Sciences Kimble™ Kontes™ Reagent Sprayers with Screw Thread Ground Joint

Provide uniform spray mist of visualization reagents for TLC and paper chromatography; use with all standard TLC reagents and most corrosive liquids TLC SPRAYER 50ML

Kimble Chase™ Drummond Microcaps Borosilicate Glass Capillary Tubes

X100 TLC applicators Microcap glass 25µL complete

DWK Life Sciences Kimble™ Chromatography TLC Plate Streaker

A simple device for uniformly streaking TLC plates. Kontes Chromatography TLC Plate streaker

Cole-Parmer™ TLC plate holder holds up to 25 TLC plates of any size plastic bottom grooves slope toward back vertical support grooves

HOLDS UP TO 25 TLC PLATES OF ANY SIZE PLASTICbottom grooves slope toward back vertical support

Azlon™ Polypropylene Spotting Tile

Constructed of high quality Polypropylene which is unbreakable in normal use. Azlon™ Polypropylene Spotting Tile consists of 12 cavities with 1mL capacity and 4mm well depth. Economical alternative to ceramics. X10 Tile spotting 115mm x 95mm x 12 cavity

MP Biomedicals™ EcoChrome™ Silica TLC Plate

Used as a defoamer component. In hydrated form, it is used in toothpaste as a hard abrasive to remove tooth plaque. SiO ICN SILICA PLATES F254 220PLATES

Macherey-Nagel™ Adamant™ Unmodified Standard Silica Layers for TLC, UV254

Increase separation efficiency and maximize resolution during TLC (thin-layer chromatography). Adamant™ Unmodified Standard Silica Layers for TLC, UV254, are available on glass plates with an optimized binder system and UV indicator. X25 ADAMANT TLC precoated plates UV 254 thicknessof layer: 0.25 mm size: 20x20 cm

Macherey-Nagel™ Standard SIL G Silica Layers on Polygram™ polyester sheets

Separate non-volatile mixtures with unmodified standard silica layers for TLC (Thin-Layer Chromatography). Standard SIL G silica layers on Polygram™ polyester sheets come in a variety of sizes. Select fluorescent indicator and choose from a variety of pack sizes. X50 POLYGRAM sheets SIL G/UV254 size: 5 x 20 cm

Macherey-Nagel™ Durasil-25/UV254 TLC Plate

X50 TLC precoated plates DURASIL-25 UV 254 size: 10x20 cm

Fungilab™ Knob-lid for Separation Chambers

Knob Lid for use with Fungicrom Separating Chambers (TLC). LID FOR TLC TANK 10X10CM

Macherey-Nagel™ Glass Plate Adamant

X25 ADAMANT TLC precoated plates thickness of layer: 0.25 mm size: 10x10 cm

Macherey-Nagel™ Alugram Aluminum Sheet SILGUR

X20 ALUGRAM Xtra sheets SILGUR UV254 with concentrating zone size: 10 x 20 cm

Macherey-Nagel™ Standard SIL G Silica Layers on Alugram™ Aluminum Sheets UV254

Separate non-volatile mixtures with unmodified standard silica layers for TLC (Thin-Layer Chromatography).  Standard SIL G Silica Layers on Alugram™ Aluminum Sheets UV254 come in a variety of sizes. X20 ALUGRAM-Sheets SIL G/UV 254 thickness: 0.2 µm, size: 10 x 20 cm

Haldenwanger™ Porcelain Color Test Plate

TILE PORCELAIN 125 X 95 X 12MM

Macherey-Nagel™ Standard SIL G Silica Layers on Alugram™ Aluminum Sheets

Separate non-volatile mixtures with unmodified standard silica layers for TLC (Thin-Layer Chromatography). Standard SIL G Silica Layers on Alugram™ Aluminum Sheets come in a variety of sizes. X50 ALUGRAM SIL G, 5x20 cm

Nano-SIL Unmodified HPTLC Silica Layers on Glass Plates

Separate mixtures with sharp separations, short developing times and short migration distances. Nano-SIL Unmodified HPTLC Silica Layers on Glass Plates have an increased detection sensitifvity compared to SIL G plates. X25 TLC precoated plates Nano-SIL-20 UV 254 size:10x10 cm

Fungilab™ Fungicrom Separating Chambers (TLC)

Fungicrom Separating Chambers (TLC) are to be used with thin layer chropatography. CHAMBER MINIPLAK (WITHOUT LID)

Macherey-Nagel™ Developing Chamber

X4 Development chamber 4

Macherey-Nagel™ Alugram Aluminum Sheet Nano-SIL G/UV254

X50 ALUGRAM Xtra sheets Nano-SIL G/UV254 size: 5 x 20 cm

Macherey-Nagel™ Xtra SIL G Silica Layers on Alugram™ Aluminum Sheets UV254

Separate non-volatile mixtures with unmodified standard silica layers for TLC (Thin-Layer Chromatography). Xtra SIL G Silica Layers on Alugram™ Aluminum Sheets UV254 come in a variety of sizes. X20 ALUGRAM Xtra-Sheets SIL G/UV 254 size: 10 x 20 cm thickness: 0.2 µm

  spinner