S.C.A.T. Europe

SCAT_Banner


About S.C.A.T.


We bring you safety and comfort

Daily laboratory work with hazardous substances should be safe and trouble-free. With more than 20 years of experience, S.C.A.T. Europe offers the most sustainable safety systems for safe supply and disposal of liquid chemicals in laboratories worldwide.


S.C.A.T. stands for Safety-Center-Analyses-Technology. The company was founded to protect technicians in analytical laboratories from harmful materials used in the working environment. Founded in 2003, S.C.A.T. Europe pioneered the solution to reduce laboratory solvent air pollution from acetonitrile in HPLC systems. Scientists who work with HPLC know how important constant parameters are. S.C.A.T. Europe SafetyCaps prevent solvent emissions and guarantee a stable stationary phase and constant reflection times. These results were officially documented by an SGS Fresenius study. Increasingly, leading International equipment manufacturers are installing S.C.A.T. Europe components as a standard feature in their HPLC systems.

  • More than 600 safety solutions for safe handling of hazardous chemicals in the laboratory
  • Avoid hazardous vapours in your laboratory
  • Protect people’s health and workplace environment
  • Safe solvent supply and chemical waste disposal
  • Level monitoring systems
  • Safety funnels
  • Lab furniture integration
  • Safety containers
  • Manufactured by S.C.A.T. in Germany
  • Universal compatibility
  • All products developed in conjunction with major chemical and pharmaceutical companies. 
SCAT_Europe_ProfessorV2
Extraction Systems
Extraction systems Extraction systems

Extraction systems - SafetyCaps

How do you extract your solvents?

The first and foremost concern is chromatography and secondly, safe handling of solvents is taken into consideration. It is remarkable how little attention is given to one's own health protection. Everyone who works in the laboratory should be aware of the high level risk potential through hazardous solvent vapors. There are still numerous risky types of closures for solvent bottles in use. The inadequate handling during extraction of solvents also has consequences on your work results. The extraction capillaries can slide out of the solvent bottle because they are not screwed on tightly. This can cause air to be sucked in and HPLC equipment down times are thus "permanently calculated." In addition, the mobile phase gets contaminated by dust particles in the air. Similarly, evaporation loss of light volatile solvents can occur and change the mixing ratio of solvent compounds - so the results are distorted. This plays a particular role with UHPLC. Solvent filtration and precisely prepared mobile solvents, with constant mixing ratios throughout the entire term, are a must with UHPLC! In addition, solvent exchange with common screw caps is difficult to handle. Often, the well-known "tangled capillaries“ occur, when supply bottles have to be exchanged. Trust the market leader: S.C.A.T. - SafetyCaps are THE safety solution!

  • No more harmful vapors thanks to the integrated air valve.
  • Confidence during audits. With S.C.A.T. systems, you pass quality and safety inspections with confidence.
  • Easy container changes thanks to freely rotatable cap even with capillaries installed. Without twisting or "tangled capillaries“.
  • No eluent contamination Receptacles remain securely closed so the results of your analysis stay correct.
  • No capillary slippage so no accidental intake of air into the HPLC system. No interruption of analytical and work processes due to air pockets in the capillary.

 

Download brochure [PDF]  »

Waste Systems
Waste Systems Waste Systems

Waste Systems - SafetyWasteCaps

One system for every thread!

The fluids in the waste containers in the laboratory are overwhelmingly poisonous - the user often does not know which mixture can emerge in the canisters.

Closed safety systems from S.C.A.T. Europe offer reassuring protection and also guarantee efficient work in the laboratory.

  • Filter systems against harmful vapors
    You will find exhaust filters in different sizes
  • Different thread sizes
    Use SafetyWasteCaps on your avaliable containers, or order the appropriate canisters at the same time!
  • Resistance against aggressive media
    Because they are made of pure PTFE and PE-HD, SafetyWasteCaps are resistant against organic solvents, acids and lyes

Download brochure [PDF]  »

HPLC Safety Set
HPLC Safety Set HPLC Safety Set

HPLC Safety Set - Goes with all HPLC systems!

One configuration for all purposes!

Includes:

  • Solvent bottle
  • SafetyCap
  • Waste Canister
  • SafetyWasteCap
  • Exhaust Filter
 

Download brochure [PDF]  »

Safety Funnels
Safety Funnel Safety Funnel

Safety Funnels

  • Made of high quality PE-HD
  • Removable sieve
  • Various thread sizes
  • Adapters for barrels available
  • Low design – also fits beneath low work surfaces
  • Available as electrostatic conductive
  • New design
  • Improved handling
  • Optimized application possibilities
  • World-wide unique design

Download brochure [PDF] »


Safety Funnels with ball valve

  • The ball floats and automatically closes after filling
  • Quick and safe disposal - with both hands free
  • Splash protection and sieve to catch dirt and larger contaminant particles S.C.A.T. Europe Safety Funnels with ball valve and splash protection are world-wide unique and have become an efficient standard at the safe disposal of waste in laboratory and production.
  • Sieve, removable. For trapping stirrers or larger contaminant particles. Now made of PE-HD instead of stainless steel, so no corrosion by acids or lyes.
  • Splash protection. For uniform discharge without splashes.
  • Ball valve. The ball floats and automatically closes after filling. For the disposal of small quantities and sticky liquid waste into the container, we recommend to rinse enough with water after using the funnel with ball valve, to prevent a potential sticking or stucking of the ball valve.
  • Freely rotatable cap. In different thread sizes for a wide variety of containers.
  • Safety lance. Ensures clean outflow without contaminating the container opening. With electrically conductive funnels (black), the lance facilitates a safe additional grounding of the contents.
  • Electrostatic conductive PE-HD. All safety funnels in black (with ball valve or hinged lid) are made from electrostatic conductive PE-HD and have a ground connection to prevent ignition risks. The funnels are delivered with ground cable and clamp.

Safety funnels with hinged lid

  • Compact version optimally suited for restricted space conditions in the laboratory
  • Properly closed thanks to the hinged lid
  • Removable sieve for easy clean-up this compact version with hinged lid is optimally suited for restricted space conditions in the laboratory. The sieve can be removed for cleaning.
  • Sieve, removable. For trapping stirrers or larger contaminant particles. Now made of PE-HD instead of stainless steel, so no corrosion by acids or lyes.
  • Hinged lid. For clean closure.
  • Freely rotatable cap. In different thread sizes for a wide variety of containers.
  • Safety lance. Ensures clean outflow without contaminating the container opening. With electrically conductive funnels (black), the lance facilitates a safe additional grounding of the contents.
  • Electrostatic conductive PE-HD. All safety funnels in black (with ball valve or hinged lid) are made from electrostatic conductive PE-HD and have a ground connection to prevent ignition risks. The funnels are delivered with ground cable and clamp.
Level Control
Level Control Level Control

Disposing with care

  • Fill level monitoring can save lives!
  • No overflowing - the plant fire brigade stays in the garage
  • Never vacate the laboratory again due to hazardous vapors

Level Control with disc sensor

  • Simple installation - for all typical containers made of glass or non-conductive plastic
  • Warning optionally at fill or low level
  • Sensitivity can be adjusted to different wall strengths

Level Control with SafetyWasteCap

  • Connect SafetyWasteCaps with electronic level control directly to a Signalbox
  • No additional sensor required
  • For containers made of conductive plastic and metal
  • Many thread sizes available

Download brochure [PDF] »


Electronic signal boxes T1 & T5

  • Connect SafetyWasteCaps with electronic level control directly to a Signalbox
  • No additional sensor required
  • For containers made of conductive plastic and metal
  • Many thread sizes available

Optical level control

  • Integrated optical level control
  • Container with viewing strip or floater
  • Made from electrostatic conductive PE-HD
  • Canister with UN approval - permitted for transport of hazardous goods on roads and plant premises

Everyday tasks in the laboratory that have become „The back of our hands“ – and we know, especially this is where the danger lurks. One of those seemingly trivial tasks is the disposal of solvents into the available containers. Everybody uses them, everybody dumps into them, but who ensures that the containers don’t overflow? However, overflowing waste containers in laboratories can be dangerous when work is done with critical substances and solvents. Dangerous fumes can spread fast. This is not only dangerous for individual health but under certain circumstances, can also lead to an explosion. Mechanically or electronically controlled containers provide more operational safety and protection from such serious consequences. The level control developed by S.C.A.T. gives warning through an optical and acoustic signal before the waste container overflows. In addition, connecting devices such as pumps and valves can be actuated via contact switches. Depending on demand, the different containers can be equipped either with non-contact sensors for exterior attachment or with float-controlled mechanical/optical and electronic/optical sensors. With the appendand electronic signal boxes, up to 5 containers can be monitored at the same time. Liquid waste can be safely collected by tubes or manually; the sensor triggers an alarm if a critical fill level is reached. In addition, an integrated safety funnel can be attached to the safety cap. It is only opened during filling and closes automatically afterwards. Running on empty can also cause damage. Also, in the opposite case, an empty level indicator might be required when the containers should not run empty. Some think timely refilling is sufficient and so undertake the risk, refilling might be forgotten. S.C.A.T. Europe offers just the right equipment for this. All sizes of laboratory glass bottles, canisters, barrels and tank containers can be equipped with the system. Additional installations are not required for this. According to the motto: “Plug and Play”, every level control is delivered as fully operational and with all the necessary components.

Containers
Containers Containers
ContainersSmallNEW

Containers

Lab bottles

  • Compatible with the S.C.A.T. Safety System. All Lab bottles are combinable with our SafetyCaps.
  • Several glass types. Clear glass, brown glass and also with protective coating.
  • Several forms. Available in round, square and wide neck opening.
  • NEW: Duran® YOUTILITY. Ergonomically design simplifies the grasp of lab bottles. Changeable and coloured rubber rings at the bottleneck are some clever marking-labels to get organised in the lab.

Canisters

  • Compatible with the S.C.A.T. Safety System. All Canisters are combinable with our SafetyWasteCaps.
  • UN approval. Permitted for transport of hazardous goods on roads and plant premises.
  • Optional with electrically conductive material. For grounding also available in electrically conductive PE-HD!
  • NEW: Fluorinated canister. Fluorinatin on both sides protect the canisters plastic walls from permeation of chemicals.
  • NEW: Canister with colour marking - ColourLine. Canister with colour marking at the grip. Clearly separating of different waste liquids. Separate liquid waste with halogens and those who are halogen- free clearly from each other.

Collection trays

  • Suitable for all S.C.A.T. canisters. Keep your environment safe and dry!
  • Optional with electrically conductive material. For grounding also available in electrically conductive PE-HD!
  • Available with base insert. Protect the canisters on a higher level, with the base insert they always stay clean and dry.

Download brochure [PDF] »

Products

S.C.A.T.™ Economy Package Exhaust Filters w/Change Indicator

Keep your workspace safe and clean by filtering solvents and pollutants with the S.C.A.T.™ Economy Package Exhaust Filters w/Change Indicator. The filters attach to the solvent reservoir. X4 Exchange packing S filter with splash guard andchange indicator

Scat™ Air Valves For SafetyCaps

Block harmful vapors and protect your solvent from contamination with these valves. Scat™ Air Valves For SafetyCaps feature PTFE filters for contaminants and dust particles. X10 Air valve for SafetyCaps

Scat™ GL 45 Thread Safety Caps

Block solvent vapors with ventilation during removal with the Scat™ GL 45 Thread Safety Cap. It also features an air valve that combines valve and filter functions and solvents stay clean and components of solvent mixtures cannot evaporate. SafetyCap III, GL45, 3x 3,2mm OD

X10 Blind plugs f. cap. con. 1,6/2,3/3,2mm OD, PFA

Use as a standard connection that fits O.D. tubing of 1.6, 2.3, or 3.2mm. Blind plugs 6,35mm OD, PTFE, white

S.C.A.T. Europe™ Safety Exhaust Filter for SafetyWasteCap

The S.C.A.T. Europe safety disposable exhaust filter keeps your workspace safe clean and protects from harmful vapors - with the helpful change indicator. It cleans solvent vapors from the exhaust air. Exhaust filter L, w. splash guard

SCAT Exhaust Filter for SafetyWasteCap, Fire Resistant

Protects from harmful vapors and keeps your workspace safe and clean. Exhaust filter S, fire-resistant

SCAT SafetyCap I, S40/GL40

Extraction system receiver vessel safety cap with S40/GL40 threads, and connector fitting. SafetyCap I, S40, 1x 3,2mm OD, for Merck bottles

S.C.A.T.™ Polypropylene Suction Filter

X5 HPLC solv. filters f. 1/8", 10µm, UH-PE

SCAT Thin, Space-Saving Canister, S50, 5 L, PP

Space-saving canister that fits into slim vertical spaces and features an S50 thread mouth. Platzspar-Kanister, 5 Liter

S.C.A.T.™ Straight Tube Fittings

Providing connection flexibility in the laboratory. Unbowed connector, 9,5mm

SCAT Round Canister, B53, 2L, HDPE

Durable, round HDPE canister with a B53 threaded mouth features chemical resistance. Round can (Nalgene bottle) 2 L, B53, PE-HD

S.C.A.T.™ HDPE Safety Canister

Indicate critical fluid levels in time and avoid overflow with the S.C.A.T.™ HDPE Safety Canister. The container can be grounded to avoid electrostatic charge, especially when using in sensitive areas. Can 5 L, S95, PE-HD, UN-Y approval

Scat™ HDPE Safety Funnels With Ball Valve

funnel w. ball, S50, not cond., PE-HD

S.C.A.T.™ S 50 Safety Waste Cap

SafetyWasteCap S50 2x2,3/3,2 mm OD, 1x6,4 -9 mm ID

S.C.A.T.™ HDPE Safety Funnel Balls

Use S.C.A.T.™ HDPE Safety Funnel Balls as a critical component of the plastic safety funnel used to facilitate the collection and disposal of hazardous waste liquids. Funnel w. ball, S60/61, cond., PE-HD

S.C.A.T. Europe™ SafetyCaps HPLC Safety Set 2

For safe and clean liquid extraction process; it is ideal for HPLC solvent extraction. Easy to use and comes with self-sealing fittings and tube connectors, free turning PTFE body and port for the air valve, air valve included. Offers reassuring protection and efficient work in the laboratory. 1SET std.II: 4XSAFETYCAP II,INCL,8XFITTING 3,2MM,4X PLUG 1Ki

S.C.A.T.™ GL 45 Safety Waste Caps

Pass quality and safety inspections with confidence. with S.C.A.T.™ GL 45 Safety Waste Caps. There is no eluent contamination since receptacles remain securely closed, ensuring the integrity of your analyses results. SafetyWasteCap, GL45, 3x 2,3/3,2mm OD

S.C.A.T.™ Air Valve for Safety Caps

Use the S.C.A.T.™ Air Valve for Safety Caps to block harmful vapors and protect your solvent from contamination. Because it absorbs dust and contaminant particles from the surrounding air, the valve should be replaced every 6 months to ensure flawless operation. Air valve f. SafetyCaps, preparative, UNF 1/4" 28G

S.C.A.T.™ Safety Cap IV

SafetyCap VI, GL45, 6x 3,2mm OD

SCAT Canister with Level Viewing Strip, S50, 10 L, HDPE

Durable electrostatic HDPE-EC canister with a viewing strip for level control and an S50 thread mouth. CANISTER PE-HD 10L S 50

SCAT Canister, GL45, 2.5 L, HDPE

Durable HDPE canister with a GL45 threaded mouth features chemical resistance. GL 45 Canister 2.5 Liter, PE-HD

Scat™ Signal Box T1

Signalbox T1 with disk level sensor cable 3mVelcro tape for disk sensor 2m EU power supply

S.C.A.T.™ HPLC Safety Set

Extract and dispose of your laboratory pollution with S.C.A.T.™ HPLC Safety Set. All products are specially matched to the S.C.A.T.safety system. HPLC Safety Set

S.C.A.T.™ Safety Waste Caps

SafetyWasteCap GL45, automatic closure

S.C.A.T.™ S 60/61 Safety Waste Caps

SafetyWasteCap, S60/61, automatic closure

Scat™ Duran Round Neck Borosilicate Glass Lab Bottle

Bottle DURAN, GL45, 2 L, clear glass, round

S.C.A.T. Europe™ GL 45 SafetyWasteCap

For safe, clean liquid disposal. Ideal for HPLC waste disposal or any liquid waste disposal in the Lab. Easy to use and comes with self-sealing fittings, connectors and funnel, free turning PTFE body and port for the exhaust filter. Offers reassuring protection and efficient work in the laboratory SafetyWasteCap, GL45

S.C.A.T. Europe™ Blind Plug for Preparative HPLC

Safety Accessories to fit around S.C.A.T. Europe safety Caps, Safety Waste Caps and containers. Blind plugs 4,76mm OD, PTFE, white, 5 Pcs./unit

  spinner

Offers


Resources

Electrostatic Explosion Test

Imagefilm EN

LEVEL DISC SENSOR 108048


SYMLINE®-TUBE HOLDER

SYMLINE® FLEXTUBE PRO

SYMLINE® FLEXTUBE


SYMLINE® DISPOSAL SYSTEM

SAFETY FUNNEL WITH LEVEL CONTROL

SAFETYCAP CPC QUICK CONNECTION